Key takeaways
- A wind mitigation inspection documents specific, verifiable construction features on a standardized state form (OIR-B1-1802), not a general opinion of your home's condition.
- The features that earn credits include roof covering age/compliance, roof deck attachment method, roof-to-wall connections, roof shape, secondary water resistance, and opening protection (impact windows, doors, and shutters).
- Credits stack: a home with several strong features (a hip roof, clips or wraps at the roof-to-wall connection, and impact-rated openings) typically earns a larger combined discount than a home with just one.
- Discounts vary by carrier and are not standardized dollar amounts — ask your agent to re-rate your specific policy with the completed form before assuming any particular savings.
- The inspection is generally performed by a licensed contractor, engineer, or qualified home inspector, and typically needs to be redone after a full roof replacement or major exterior renovation.
What the inspection actually documents
A wind mitigation inspection is a physical, feature-by-feature survey of your home's roof and openings, recorded on Florida's standardized Uniform Mitigation Verification Inspection form, OIR-B1-1802. Unlike a general home inspection, it isn't a pass/fail judgment — it's a checklist of specific construction details that catastrophe research has tied to better performance in high wind events. The inspector photographs and documents each item, and the completed, signed form is what your insurer uses to apply (or decline to apply) individual premium credits.
Because the form asks about construction details that are sometimes hidden behind drywall, insulation, or roofing material, the inspector may need to access the attic, examine permit records, or in some cases make a small inspection opening to verify how the roof deck is actually fastened. This is normal and is part of why the inspection takes real time rather than a quick walk-around.
The specific features insurers credit
Roof covering: the form documents the type of roof covering and whether it was installed to the wind-resistance standards in effect at the time, which matters most for confirming your roof isn't past the point where an insurer treats it as a heightened risk. Roof deck attachment: how the plywood or OSB roof deck is nailed to the trusses or rafters — nail size, spacing, and pattern all affect how well the deck resists being lifted off in high winds, and better attachment methods earn higher credit tiers.
Roof-to-wall connection: whether the roof structure is attached to the walls with simple toe nails, or with metal clips or straps, and whether those straps form a single or double wrap — connectors are one of the largest-credit items because roof-to-wall failure is a major cause of catastrophic wind loss. Roof shape: hip roofs (which slope on all four sides) generally perform better aerodynamically than gable roofs and typically earn a credit on their own. Secondary water resistance (SWR): a self-adhering membrane or sealed roof deck that keeps water out even if the roof covering is damaged. Opening protection: impact-rated windows, doors, garage doors, or code-compliant shutters covering every opening, which reduces the risk of a wind-driven object breaching the building envelope and causing internal pressurization that can lift the roof.
How large are the credits, really
The honest answer is that credit magnitudes vary by insurer, territory, and how many features a specific home has, so there's no single published discount that applies to everyone. Industry and consumer-education materials from groups like the Insurance Institute for Business & Home Safety (IBHS) describe combined wind-mitigation credits that can meaningfully reduce the wind portion of a premium for homes with strong roof-to-wall connections and full opening protection, while a home with only one or two weaker features may see a much smaller adjustment.
Because the wind portion of a Florida homeowners premium is often the largest single component, even a moderate percentage credit on that portion can translate into a real dollar reduction — but the only way to know your own number is to get the inspection done and ask your agent to re-rate the specific policy with the completed form in hand.
How to get one, and what it costs
Inspections are typically performed by a state-licensed general contractor, professional engineer, professional home inspector, or certain other licensed professionals authorized under Florida law to complete the form. Costs for a typical single-family home inspection commonly fall in a range of roughly $75 to $200, though pricing varies by region and inspector; for most homes with several credit-worthy features, the savings from even one year of a reduced premium can exceed the one-time inspection cost, though this depends entirely on your specific home and carrier.
The completed form is generally valid for five years unless the home undergoes a change that would affect the answers — most commonly a full roof replacement, which resets the roof-covering and roof-deck-attachment answers and typically requires a fresh inspection to keep credits current. Homeowners considering a new roof sometimes ask their roofer in advance about installation choices (like adding a secondary water-resistant underlayment, or attachment methods that qualify for a higher credit tier) so the new roof earns the best available credit once reinspected.
Going further: the FORTIFIED standard
For homeowners doing a full roof replacement or major renovation, the FORTIFIED Home program (developed and maintained by IBHS) offers a voluntary, third-party-certified construction and re-roofing standard that goes beyond baseline wind mitigation credits, specifying sealed roof decks, upgraded edge and ridge details, and other features aimed at reducing water intrusion and structural wind damage. Some Florida programs and carriers offer additional incentives tied to FORTIFIED certification specifically, on top of the standard wind mitigation credits, though availability and amounts vary and are worth confirming directly with your insurer before committing to the certification process.
Sources
- Florida Office of Insurance Regulation — Uniform Mitigation Verification Inspection Form (OIR-B1-1802)
- Insurance Institute for Business & Home Safety (IBHS)
- FORTIFIED Home program
- Florida Department of Financial Services — My Safe Florida Home Program